Ure-K® Spray Coatings

• Thermal Barrier Coating for Polyurethane Foam
• Thermal Insulation
• Acoustic Enhancement

CAN/ULC-S124-06 APPROVED THERMAL BARRIER

Ure-K is a thermal barrier approved as a building interior insulation to delay the ignition and reduce the surface burning rate of low melting, combustible rigid spray-on polyurethane foam. Ure-K may be sprayed over foam in existing building or it can be used as a protective coating over foam in new construction projects as a combination system. Ure-K as a thermal barrier meets the requirements of classification B when tested in conformance with CAN4-S124-M, Standard Method of Test for the Evaluation of Protective Coverings for Foamed Plastic.

Thermal Insulation

Ure-K applied over polyurethane provides additional thermal resistance which will meet the stringent "R" values required for today's energy conservation needs. The combination of Ure-K and polyurethane has the highest efficiency of all available insulations.

Noise Control

Ure-K is a monolithic coating which will provide a highly efficient sound absorption surface in either new or existing building. This is an important benefit in controlling noise levels to meet OSHA and other requirements.

LEED contribution points

Ure-K can contribute to various LEED points. Contact us to find out how.

Installation

Ure-K fibres and liquid binder are applied to the surfaces simultaneously in separate streams through equipment especially engineered to control the material density and adhesive/fibre mixture. The Ure-K binder provides excellent adhesion to all types of polyurethane foam insulations.

Ure-K & Urethane Uses

The combination of Ure-K Spray Coating and urethane can be used in a variety of applications:

• Freezers
• Coolers
• Refrigerated warehouses
• Metal buildings
• Underground parking decks
• Projects requiring high R-values
• Curtin wall high rise buildings
• Tilt-up, precast & poured-in-place concrete construction
• Energy conservation

Limitations

Ure-K should not be applied in areas where there is prolonged exposure to water, nor necessity for requiring a washable surface or where contaminants such as dust, lint or oil mist exist. If flammable contaminants collect on the Ure-K surface, it should be removed or over sprayed with a fire retardant solution. Ure-K should not be used in areas where temperatures exceed 150°F, at the Ure-K surface, for long durations. Do not apply Ure-K in areas where mechanical damage will result, unless it is protected.